complete Assembly line with just 2 modules

LOGO!MAT T-Series Track Rotates

• Pneumatic or electric rotation
• Damper for end positions in 90° module
• No need for additional guarding
• Track connections possible in 90° increments
• Can be used as corner, divert, junction, 2 way divert, 3 way divert and intersection

LOGO!MAT T-Series Pallets

• Skid pallet design
• Curve travelling as an option
• Standadized interface for top plate
• Integrated stop unit insert with return stop
• Available as electrically conductive
• Minimal wear
• Oil resistant

LOGO!MAT T-Series Stop units

• Pneumatically (standard) or electrically activated
• Active end position
• Adjustable for pallet weights of 10 to 250 kg
• Conveyor or station mounted
• Sensor optionally available
• Cushioned and non cushioned
• With offset arm available

LOGO!MAT T-Series Locate Units

• Pallet location tolerance of +/-0.2mm
• Pneumatically operated
• Conveyor or station mounted
• Sensors optionally available
• Optional double index possible

LOGO!MAT T-Series Lift and Locates

• Possible loads of 0 - 250 kg
• Available strokes: 3 - 300 mm
• Pneumatic lift
• Conveyor or station mounted
• Sensors optionally available
• RFID holders, fall protections and safety covers available

LOGO!MAT T-Series Lift and Rotates

• Manual or electrical rotation with friction clutch
• Loads: 0 - 250 kg (0 - 550 lbs.)
• Defined lifting height
• Pneumatic locking pin in 90° increments
• Conveyor or station mounted
• Options: RFID bracket and pneumatic fall protection

LOGO!MAT T-Series Elevators

• Crank arm elevators for strokes of up to 600 mm
• Tooth belt elevators for strokes of up to 4,300 mm
• Configurations and options per customer requirements

LOGO!MAT T-Series Shuttles

• Electrically driven (frequency converter needed)
• Pneumatic lift
• Pallets can travel through even when lifted
• Load independent drive
• Robust linear guides
• Mechanical friction clutch

LOGO!MAT T-Series Liftgates

• Mechanical lift gate with minimal operating forces
• Mechanical lock with sensor
• Optional pneumatic lock available
• Ergonomically operated
• Clearance and openings of up to 1.3 m possible

LOGO!MAT T-Series Swinggates

• Pneumatically locked
• Panic function for Openings in E-Stop situations
• Minimal conveyor height of 500 mm
• Openings of up to 4,000 mm available
• Optional return stops available
• Great clearance due to opening angles of up to 170°

LOGO!MAT L-Series Manual Docking Carts

• Available for all nominal widths
• Size and configuration based on customer requirements
• One hand operation for lock and return stop activation
• Can be used in both directions
• Mechanical return locks available
• Can be configured for defined pallet orientations

LOGO!MAT T-Series Rollers

• Robust, adjustable and non adjustable friction rollers
• High quality bearings
• Manufactured and assembled in house
• Stub rollers available