The flexible conveyor system for loads of up to 250 kg

LOGO!MAT L-Series Track

• Solid aluminum frame
• Available in 229, 286, 400 and 514 mm widths
• ECO or heavy duty steel friction rollers
• Weight capacity of 100kg (ECO) and 250 kg (heavy duty)
• Height adjustable leg sets
• Structural pipe for additional support
• High quality, durable and low maintenance chain drive

LOGO!MAT L-Series Rollers

• Robust, adjustable and non adjustable friction rollers
• High quality bearings
• Manufactured and assembled in house
• Stub rollers available

LOGO!MAT L-Series Pallets

• Pallet base for curve travelling
• Also available as skid version
• Standadized interface for top plate
• Integrated stop unit insert with return stop
• Available as electrically conductive
• Minimal wear
• Oil resistant

LOGO!MAT L-Series Corners

• Available for all nominal widths
• No need for guarding
• No controls needed
• Optional corner covers available
• No accumulation in corner area possible

LOGO!MAT L-Series Diverts & Junctions

• Available for all nominal widths
• No need for guarding
• Pnematically or electrically driven
• Junction non driven, pallet operated
• Sensors optionally available
• Optional rotation damper

LOGO!MAT L-Series 2 - Way Diverters

• Available for all nominal width but NW229
• No need for guarding
• Electrically driven
• No need for frequency converter
• Integrated, mechanial friction clutch
• Good to merge and split tracks

LOGO!MAT L-Series Intersections

• Works with long pallets only (unit for shot pallets upon request)
• No need for guarding
• Pneumatically activated guides
• No accumulation possible

LOGO!MAT L-Series Rotate Units

• Electrically driven rotation (Frequency converter required)
• Available for certain nominal widths only
• No need for guarding
• Pneumatic shot pin in 90° locations
• No accumulation possible
• Palet stop via sensors
• Individual conveyor drive

LOGO!MAT L-Series Track Rotates

• Electrically driven rotation (Frequency converter required)
• Pneumatic shot pin in 90° locations
• No need for guarding
• Track connections in 90° increments

LOGO!MAT L-Series Stop Units

• Available for all nominal widths (NW229, non-cushioned only)
• Active end position
• Adjustable for pallet weights of 10 to 250 kg
• Pneumatically (standard) or electrically activated
• Conveyor or station mounted
• Sensor optionally available
• Cushioned and non cushioned
• With offset arm available

LOGO!MAT L-Series Locate Units

• Available for all nominal widths
• Pallet location tolerance of +/-0.2mm
• Pneumatically operated
• Conveyor or station mounted
• Sensors optionally available
• Optional double index possible

LOGO!MAT L-Series Lift and Locates

• Available for all nominal widths
• Possible loads of 0 - 250 kg
• Available strokes: 3 - 300 mm
• Pneumatic lift
• Conveyor or station mounted
• Sensors optionally available
• RFID holders, fall protections and safety covers available

LOGO!MAT L-Series Pallet Kickers

• Available for all nominal widths
• Controlled via stop unit valve
• Pneumatically activated
• Ensures a repeatable acceleration (no faster acceleration)
• To be installed with stub rollers

LOGO!MAT L-Series Elevators

• Crank arm elevators for strokes of up to 600 mm
• Tooth belt elevators for strokes of up to 4,300 mm
• Configurations and options per customer requirements

LOGO!MAT L-Series Shuttles

• Electrically driven (frequency converter needed)
• Pneumatic lift
• Pallets can travel through even when lifted
• Load independent drive
• Robust linear guides
• Mechanical friction clutch

LOGO!MAT L-Series Track Shuttles

• Electrically driven (frequency converter needed)
• Movable independent driven track section
• Supports up to three transfer lanes
• Stationary base frame
• Robust linear guides
• Mechanical friction clutch

LOGO!MAT L-Series Lift Gates

• Available for all nominal widths
• Mechanical lift gate with minimal operating forces
• Mechanical lock with sensor
• Optional pneumatic lock available
• Ergonomically operated
• Clearance and openings of up to 1.3 m possible

LOGO!MAT L-Series Swing Gates

• Available for all nominal widths
• Pneumatically locked
• Panic function for Openings in E-Stop situations
• Minimal conveyor height of 500 mm
• Openings of up to 4,000 mm available
• Optional return stops available
• Great clearance due to opening angles of up to 170°

LOGO!MAT L-Series Ball Roller Tables

• Available for all nominal widths
• Size and configuration based on customer requirements

LOGO!MAT L-Series Manual Docking Carts

• Available for all nominal widths
• Size and configuration based on customer requirements
• One hand operation for lock and return stop activation
• Can be used in both directions
• Mechanical return locks available
• Can be configured for defined pallet orientations